Original

Original Shower Channel

Stainless steel channel and grate.
Tiling flange that sits under the floor tile.
Channel is 35mm deep, from below the
tile with fall to waste.
Outlet is a 50 BSP PVC waste

Lowline

Lowline Shower Channel

Stainless steel channel and grate.
Top of channel sits level with the top of the tiles.
20mm deep, no fall to waste.
Outlet is a DN50 pop with an optional DN80 pop.

RX Series

RX Series

Stainless steel channel and grate.
Available in 65mm and 100mm widths and custom options.
Top of channel sits level with tiles.

Choose the width of your channel

?
Reece RX Series Shower Channel

Choose either 65mm wide (RX65) or a 100mm wide (RX100)

Back

How long is the shower channel? (mm)

?
How long is the shower channel?
  • Minimum length available is 500mm up to a maximum length of 2400mm.
  • The overall length of the channel including the tiling flanges and upstands that may be required. Note that it is NOT the length of the grate.
  • Standard sizes are 800, 900, 1200 and 1500mm.

Back

Choose the walls next to the shower channel

?
Choose the walls next to the shower channel
  • When a shower channel is being placed next to a wall it should have tiling upstands (flashing) for better waterproofing. Tiling upstands will be added where walls are selected.
  • It is recommended that the tiling upstands be installed between wall lining and tiles.
  • It is recommended that the tiling upstands be installed between waterproof membrane and tiles.
  • If it is away from the walls in the middle of the shower, don’t select any walls and move to the next step.
  • Standard models have no tiling upstands.

Back

Where will the waste outlet be located?

?
Where will the waste outlet be located?
  • This is the distance from the outside of the channel to the centreline of the waste outlet. The waste outlet can be located anywhere along the length of the channel with a minimum distance of 75mm to the centreline from either end.
  • The Waste outlet can only be in the middle of the channel from front to rear.
  • The waste must be in the centre for standard models.

Back

How far is the waste located from the shower channel end? (mm)

?
How far is the waste located from the shower channel end?

Measured from the centreline of the waste outlet to end of the channel, including all flanges and upstands.

Back

Choose the waste outlet size

?
What size should I choose?

Standard waste outlet size is 50mm (DN50) and optional 75mm (DN80) waste is also available.

Back

Choose the waste outlet size

?
What size should I choose?

Standard waste outlet size is 50mm (Small) and optional 75mm (Large) waste is also available.

Back

How thick is the wall tile?

?
How thick is the Wall tile?

Nominate the thickness of the wall tiles that are being used. The channel comes with an allowance of 3mm more than the maximum tile thickness to allow for tile adhesive.

Back

How thick is the floor tile?

?
How thick is the Floor tile
  • The grate height has an allowance of 3mm more than the maximum tile thickness so that tile adhesive brings the tile up to the grate height.
  • Standard models are manufactured with 45mm high grates, therefore must have tile thickness of 7mm or less.
  • Except in the case of the tile insert model which is only manufactured to suit tile that are 8-12mm thick

Back

Choose the grate pattern

?
Grate patterns

Tile insert pattern is only suitable for tiles 8-12mm thick and only comes in a satin finish.

Back

Choose the grate pattern

?
Grate patterns

Please select grate pattern.

Back

Choose the grate finish


Black grate includes black channel

?
Grate finish

The chrome finish is highly polished stainless steel to match tapware and the satin finish is a brushed stainless steel (the same as European appliances).

Back

Order Summary

Order Summary:

Spec
Product Code
Edit Spec
Starts Over


Please email a copy of your spec to enquiries@veitchstainless.com.au

Form Steps:
0
1
2
3
4
5
6
7
8
8
9
10
11